Lifeboat Drill Goes Awry; One Crew Member Killed
Posted by proforma on August 31, 2009 | No Comments
A fatality occured recently on a Mobile Offshore Drilling Unit (MODU) during a planned lifeboat drill.
The MODU was conducting routine testing of its lifeboats and equipment as required by regulation and launched its starboard lifeboat with a crew of seven. During recover of the lifeboat at the end of the drill, the aft hook opened, the boat swung onto its forward hook, which then failed, plunging the lifeboat and its occupants 65 feet into the sea. One crew member died and the remaining six sustained injuries.
Among the causes, it was determined that critical components of the system had deteriorated with age and use and the On-Load release system was not fully understood. For details, read the IADC report.
Tags:accident, fatality, offshore GOM, safety, Workplace Safety
Filed Under: Workplace Safety
We don’t usually post construction stories like this one, but the absence of safety systems is so glaringly apparent that we are making an exception. 
While tripping to the bottom with the drill string, the drilling crew met with an obstruction and came to a stop, which triggered the drawworks drum to spool off excess drill line. When the drum brakes were applied and the spool off stopped, the crew decided to spool the line back onto the drum.
On March 8, 2009, a contract employee died of head injuries sustained the previous day after being struck by a falling crane ball at a Port Arthur refinery construction site. 
Because of limitations of the studies that have analyzed the use of back belts in the workplace, NIOSH says the results cannot be used either to support or to refute the effectiveness of back belts in injury reduction, according to 
